CRANK B**** UP TIME.....with extra doping powder??

Well, crank b***h up time for this car...

Extra wide body for angry power?!

2.8L kit with GTX42 turbo(smaller version for response!), camshaft, 1200cc, single throttle, plenum etc. etc.

And HKS F-con Vpro ver 3.3.

This car is still run with pump gas.......and plus doping??!!We do not know the formula for this doping fuel, but there is something in, and it's works, but differently  not full E85.

This bitch is very angry...too much doping!!!

What you gonna do with this power????This is street car tho.

JUN CAMSHAFT

This EVO6 previously made just over 300kw at wheel.

But..wanna get little bit more......easiest solution??

Change camshaft from260to JUN 272 IN&EX

Changing camshaft is not difficult job but this time we had a trouble with hydraulic adjusters. It doesn't push back....even cleaned...well... just put new one then. 

Anyway put camshaft in and retune. This car run with POWER FC D-jetro.

compare with 1.5 bar of boost purple and green line, over 30kw at wheel gain just from the camshaft.

and this car made over 325kw at wheel on 1.78 bar of boost.

Is this enough? good for now,!!

EVO 4 stock internal with GT3030 /.82.

This EVO4 has stock engine with 700cc injectors, pump, reg, and LINK G4 engine management.

The turbo is Garrett GT3030(3037), 0.82, with nice look SINCO  exhaust manifold.

Very nice finished manifold.

Before boiled.

And this car made just over 300kw at four wheel, 1.5 bar of boost. Yes still stock internal, put boost down a bit for safe?

And after boiled.....

octopus leg!!!

JZX100 CHASER 2JZ stock with single turbo....

This red Chaser turn up for tuning, the engine has been upgraded ? to 2JZ single set up.

Full stock internal with Masterpower? turbo. We had a trouble with aftermarket(Chinese) throttle body to fix(air leak from shaft, not close properly, TPS adaptor is moving around etc)...well better solution is change it to some decent product, however not enough time to do it. So quick fix and start to tune.   

Well made over 370kw at wheel, 1.5 bar of boost not but at all.!! However it can be improve with high quality parts including turbo intercooler etc and...... need some extra Indian curry power....not sweets(^_^)""" ????

Another one?!!

Time for new engine? This time the clients would like to use CP piston end Eagle conrod combinations.

Just in case we check the weight of this set up.

183g x6...over 1kg weight loss.....easy diet!

New block as well! 

How many more to go???

Never end......

Unexpected.....

We have few car with this problem so far, unexpected and unwanted trouble.

Cracked valve guide.....

This time, it's happen when car was idleing.    Hopefully it's minimum damage but still...

Well, time to upgrade internal and head job!

Fake Air Flow Metwer 300ZX 22680-30P00

I knew that it's not gonna work, here is another fake product, 300ZX airflow meters!

Looks similar but this is not going to work properly, it will harm your engine!

Please stay away if you can?

Left:Fake!!(looks doggy anyway?)

Copy,Fake, Imitation  whatever you can call it!!

genuine

And Apexi air filer as well!(*_*)"""""

Left: genuine! and lost 10kw at wheel from Fake(*_*)""""

RB25DE+ Turbonetic turbo!

RB25DET is getting expensive, however DE is still cheap??So we have SR DE+T how about RB25DE+T?

This R32Skyline has RB25DE+T engine, ALL stock internal plus Turbonetic turbo.

Controlled by LINK G4 ECU, 550icc injector, etc.

Look like similar size with T3/T4, but slightly bigger??

Here is the result, not much different from DET then!

Over 320kw at wheel, 1.15 bar of boost! Not but all with 98 pump gas tho.

However, we do not know how long it will last with Drifting??!!!

S13 SR20DET BLACK TOP with TOMEI ARMS 7960 TURBO.

Here is another SR20 engine with TOMEI turbo.

This car has 140,000km stock engine, bit risky? but let's try.

Again Tomei bolt on turbo with Poncam, injector and pump.

And here is the result, normally stock T25 turbo will make 180~190kw at wheel at 1.2 bar of boost.

With this set up, almost 100hp at engine gain.

around 380~400HP at engine.

Here is the another option.

Garrett 2871-R vs TOMEI M7960 turbo

This S14 has been running with Garrett 2871-R turbo, the engine has piston and camshaft as well.

However this turbo, the boost is dropping with rpm increase.

Solution?!!try some other turbo?

So we got this TOMEI ARMS M7960 turbo from Tomei Japan as a testimony?

See What is the differences?

As you know this turbo comes with all you need, turbo, gasket, water and oil hose, piping etc.

And we tested with same car, same engine same dyno, just change turbo and compare.

Tomei turbo is slightly lager, however this is not ball bearing turbo.

And this is the result!

As we expected that response is slower than Garrett. Around 40hp at wheel more at peak, at almost same rpm.

Boost response is slower, however steady till top.

We have another option!!